1.6mm, 2.0mm Thermal Spray Wire Nial20 Grade Nickel Based Alloy Wire

HOME

1.6mm, 2.0mm Thermal Spray Wire Nial20 Grade Nickel Based Alloy Wire

Email：

1.6mm, 2.0mm Thermal Spray Wire Nial20 Grade Nickel Based Alloy Wire

Baoji Xinyuanxiang Metal Products Co., Ltd. primarily engages in the sales of titanium, nickel, tungsten, niobium, zirconium, as well as titanium, copper, nickel, and stainless steel composite materials; it also specializes in the design and manufacturing of non-ferrous metal materials, and in the processing and sales of titanium equipment, spare parts, and standard components.

We are based in Shaanxi, China, start from 2012,sell to Eastern Europe(25.00%),North America(10.00%),Southeast Asia(10.00%),South Asia(8.00%),South America(7.00%),Africa(6.00%),Southern Europe(6.00%),Mid East(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Northern Europe(5.00%),Oceania(4.00%),Central America(4.00%). There are total about 11-50 people in our office.

PRODUCT OVERVIEW

Thermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).Thermal spraying can provide thick coatings (approx. thickness range is 20 micrometers to several mm, depending on the process and feedstock), over a large area at high deposition rate as compared to other coating processes such aselectroplating, physical and chemical vapor deposition. Coating materials available for thermal spraying include metals,alloys, ceramics, plastics and composites. They are fed in powder or wire form, heated to a molten or semimolten state and accelerated towards substrates in the form of micrometer-size particles.

Combustion or electrical arc discharge is usually used as the source of energy for thermal spraying. Resulting coatings are made by the accumulation of numerous sprayed particles. The surface may not heat up significantly, allowing the coating of flammable substances.

Coating quality is usually assessed by measuring its porosity, oxide content, macro and micro-hardness, bond strength andsurface roughness. Generally, the coating quality increases with increasing particle velocities.

Model NO.	NiAl20
Origin	China
Production Capacity	50000kg/Month

Several variations of thermal spraying are distinguished:

Plasma spraying

Detonation spraying

Wire arc spraying

Flame spraying

High velocity oxy-fuel coating spraying (HVOF)

Warm spraying

Cold spraying

Our company use Vaccum furnace and casting control to mak the NiAl alloy solid wire, it is specially used for arc spray boning layer. This wire has stable chemical composition, low oxgen and high bonding strength.

Chemical Composition

Coating Strength (Mpa)

Melting temp

(c)

Coating Hardness

(HRC)

Ni 95% Al 5%

65-68

1010

23-25

Applying technique: Arc spray

Specification of wire: 1.6mm, 2.0mm, 15kg/spool

NiAl20 is a cored wire specifically designed for either arc spraying or flame spraying. It is self-bonding to most materials and requires minimal surface spreparation. Bond strengths in excess of 9000 psi

FACTORY

正在上传...

Baoji Xinyuanxiang Metal Products Co., Ltd

ADDRESS：Baoti Road, Qingshui Road, Maying Town, High-tech Development Zone, Baoji City, Shaanxi Province

Phone：0086 13088918580

Tel：0086-0917-3650518

Fax：0086-0917-3650518

Email：info@xyxalloy.com
Whatsapp/Wechat：0086+13088918580